This CNCGLASS instruction manual describes the safe set-up, operation, cleaning and service conditions of the CNCGLASS air-cooled handheld electric thermal cutter, a portable hot-blade cutting tool for cutting and simultaneously sealing the edges of textile sheets such as curtain cloth, polyester fabric and sheer voile, so that cuts close cleanly without fraying. The cutter is an air-cooled, hand-held resistance-heated blade tool. Technical specifications listed in the manual are supply voltage AC 220 V, 50 Hz; maximum output power 130 W; maximum blade temperature 500 °C; tool body weight 610 g; tool body length 320 mm; an arc blade for fabric and synthetic textile cutting; and air-cooled handle construction. The standard package is the electric thermal cutter body, one arc cutting blade, one blade-installation spanner, one brass wire cleaning brush, and one plastic carrying case.
The manual states that the blade reaches the set temperature within seconds, and that cutting quality is best when blade temperature and hand speed are matched. It instructs the operator to unplug the power cord before installing the blade, to make a trial cut on a test piece before cutting production material, to use the tool indoors only in well-ventilated rooms, never to let the blade dry-burn when not cutting, and to clean residue with the supplied brass wire brush with the trigger released. A 12-month warranty applies from the purchase date shown on the invoice or receipt; consumable blades are excluded, and damage arising from use or storage contrary to the manual, or from non-original parts, is not covered. Enquiries can be sent to cnc@cncglass.com.