Sandblasting-White-EVA-Film-0.38mm-Performance-Summary

This CNCGLASS technical note summarizes in-house quality-control measurements for Sandblasting White EVA film, a 0.38 mm ethylene-vinyl acetate (EVA) interlayer for laminated safety glass. The film has a matte embossed (frosted) surface finish and is intended for outdoor laminated-glass applications. The note states that it is a CNCGLASS technical note and performance summary, not a third-party test certificate or a certificate of conformity, and that it does not authorize the use of any third-party laboratory mark.

For the un-laminated film, visible-light transmittance was 4.50% with one layer, 2.00% with two layers, and 1.50% with three layers; haze was 97.34%, 98.10%, and 98.13%; and UV rejection at 280-380 nm was 99.03%, 99.44%, and 99.60%. The note explains that the matte embossed surface scatters incident light, so direct visible-light transmittance of the un-laminated film reads low while haze reads correspondingly high; the embossing is absorbed during lamination, restoring visual clarity in the finished laminate. Ultraviolet rejection across 280-380 nm exceeds 99% at every layer count. Mechanical and physical properties reported for the film include Young’s modulus 9.7 MPa, tensile strength 14.8 MPa, elongation at break 601.2%, water absorption less than 0.1%, bond strength to glass 108 N/cm, and bond strength to PET greater than 40 N/cm. Gel content (crosslink degree) was 86.7%. The recommended lamination process is 80 °C for 20 minutes, then 120 °C for 60 minutes. Shelf life is eight months in sealed storage. Quality inspection of this product family is performed against EN 14449:2005 and EN ISO 12543-4:2011. Enquiries can be sent to cnc@cncglass.com.

Leave a comment

Your email address will not be published. Required fields are marked *