This CNCGLASS technical note summarizes the soft-body impact performance of architectural laminated safety glass made of 8 mm annealed glass, a 1.52 mm CNCGLASS ionoplast interlayer, and 8 mm annealed glass, evaluated against BS 6206:1981. Four panels, each 865 mm × 1930 mm, were tested; measured overall thicknesses were 17.55 mm, 17.54 mm, 17.53 mm, and 17.55 mm. Each panel was struck at mid-span by the standard soft-bag impactor from drop heights of 305 mm, 457 mm and 1,219 mm, following BS 6206:1981, Appendix A, Clause A.4. The note states that it is a performance summary, not a third-party test certificate or a certificate of conformity, and that it does not authorize the use of any third-party laboratory mark.
At 305 mm and at 457 mm, none of the four panels broke, and they were recorded as Class C and Class B respectively. At 1,219 mm, panel 1 did not break, while panels 2, 3, and 4 broke safely; all four were recorded as Class A. For the panels that fractured, both 8 mm annealed glass plies developed numerous cracks, the ionoplast interlayer held the construction intact, no shear displacement or opening developed within the body of any panel, and the detached-particle mass limits in BS 6206:1981, Clause 5.3(b) were met: the mass of particles detached within three minutes of impact did not exceed the mass equivalent of 10,000 mm² of the original panel, and the largest single detached particle weighed less than the mass equivalent of 4,400 mm². The classification recorded for this construction is Class A. Enquiries can be sent to cnc@cncglass.com.