CNCGLASS colorless transparent EVA laminating film is an ethylene–vinyl acetate interlayer for laminated safety glass, security glass, and architectural glass. In the roll the sheet is colorless and translucent; after a well-run laminating cycle it becomes colorless and transparent. This three-page technical article gives the laminating window of 105 °C to 160 °C (vacuum lamination, nip-roll pre-bond, or autoclave), the supply form from 0.2 mm to 1.14 mm thick and 800 mm to 2,400 mm wide on a 76 mm cardboard core, and typical material and optical figures, including adhesion greater than 29 N/cm, a gel fraction greater than 80 %, a refractive index of 1.48, light transmission of the laminated glass typically greater than 85 %, and an ultraviolet cut-off of 365 nm. It also surveys the mechanical, durability, acoustic, structural, and security evaluation methods commonly applied to this class of interlayer, and states that typical figures are indications and do not constitute a listing, an approval, or a warranty. Enquiries can be sent to cnc@cncglass.com.